FULLY AUTOMATIC FORM FILL SEAL POUCH PACKING MACHINE

POWDER / GRANULE / LIQUID POUCH PACKING MACHINE

Simple in design operator friendly. Adjustable volumetric cups to change fill volume size through telescopic mechanism with single knob adjustment. Photocell control penal is given for accurate positioning of printed photo mark. Digital temperature controller is used.

Equipped with automatic pouch counter to calculate output film.
Precision filling accuracy. Long life of machine with trouble free & noise free operation.

Body : M.S. Fabricated with powder coating and contact parts are S.S. 304.
Sealing Roller: made from ENS material and all gears are mild steel.
Motor: Crompton Motor 0.5 hp. I phase.
Gear Bod : Markon Make 30 ration.
Sealing width : 8 mm for each side.

FULLY AUTOMATIC AUGER BASED POWDER POUCH PACKING MACHINE

Filling System : Timerbase / Weightbase
Product to Be Pack: Free Flow/ Non Free Flow Powder
Packaging Material: Laminated Heat Scalable Films.
Quantity To Be Packed: 0.5 grm to 1000 grm.
Output Speed: Up to 25 pouches/min
Sealing Type: Center Seal.
Motor: Crompton Greaves Make
Machine Weight: 1000kg(Approx).
Pneumatics: Janatics Make.
Electricity Required: 420v,50hz,3ph.
Machine Efficiency: 99%.
Machine Dimension: 1150(W) X1250(B) X2600(H)Mm. approximate
Bagger Type: Collar Type Belt Draw.
Hopper Capacity: 50Itr.
Printing Area: 35 X35mm.
Batch Coding Type: Pneumatic Batch Coding Batch Coding
Font Sizes: 4mm.
Error In Weight: +/-1 % of Set Value.
Operation: Pneumatic
Electricity Consumption: 3000watts/Hr.
Photocell Make: P&F Visiolux Make.
Compressed Air Required: 6kgf/Sqcm.
Contact Parts: SS-304.

FULLY AUTOMATIC AUGER BASED POWDER POUCH PACKING MACHINE

Filling System : Single/ Double/ Four/ Six head base
Packaging material: Laminated heat sealable film.
Quantity to be pack : 5 grm. To 1000 grm.
Hopper Capacity : 50 Itr.
Error in weight: +/-.1 % of set value.
Operation : Pneumatic
Electricity Consumption: 4500 watts/hour.
Photocell make : P & F Visiolux make.
Electricity require : 420 V, 50Hz. 3 phase.
Compressor Air required : 6kg./sq. cm.
Batch Coding Type : Pneumatic Batch Coding.
Printing Area: 35 x35mm.
Bagger type : collar type belt draw
Product to be pack : Pouch
Output Speed : 10-12 pouch/min.
Sealing type : Central seal.
Motor: Crompton Greaves motor.
Machine weight: 1000 kg. Aprox.
Pneumatic : Festo or Janatics make.
Machine Efficiency : 99 %
Contact Part: S.S. 304
Structure : M.S. duly powder coated.
Batch Coding Font Size : 4mm.

VACUUM PACKING MACHINE FLOOR MODEL

Vacuum Chamber Size: 630 Wide x 350 Depth x 105 height.
Over all Machine Size: 680 Length x 465 Depth x 352 Height.
Construction: All Stainless Ste*l 304 or SS 304 Chamber and Miid Steel cabinet.
Viewing port: Transparent Acrylic to observe the process.
Vacuum Pump: 25 - 40 Cubic Meter / Hour
Sealing Bar: 620 mm long. 1 number
Gas Flushing: By default
Packing Cycle: 2 to 4 Cycles / minute depending upon the product
Electrical Consumption: 1 to 1.5 kw.

VACUUM PACKING MACHINE MINI / TABLE TOP

Vacuum Chamber Size: 330 Wide x 330 Depth X 75 Height.
Over all Machine Size: 350 Wide x 445 Depth x 325 Height.
Construction: All Stainless Steel 304 or S.S. 304 Chamber and Mild Steel cabinet.
Lid: Transparent Acrylic to observe the complete process.
Vacuum Pump: 100 - 150 Liters f Minute.
Sealing Bar: 320 mm long 1/2 numbers.
Gas Flushing: Optional.
Packing Cycle: 1. 5 to 2.5 Cycle / minute depending upon the products.
Electrical Consumption: Less than 0.5 Kw.

VACUUM PACKING MACHINE - FLAT BED TYPE

Vacuum Chamber Size: 700 Wide x 400 Depth x 100 Height.
Over all Machine Size: 750 Wide x 490 Depth x 952 Height.
Construction: All Slainless Steel 304 or Chamber Stainless Steel 304
& Cabinet Mild Steel.
Lid: Stainless Steel 304 with Aery tic Viewing port.
Vacuum Pump: 25 - 40 M3 / Hours
Seating Bar: 390 x 2 nos. or 790 mm long 1 number
Gas Flushing: By default and number of Nozzles as per customer's requirement.
Electrical Consumption: 1 to 1.5 Kw maximum
Packing Cycle: 2 to 4 / minute depending upon the product Electrical Consumption: Less than 1 to 1-5 Kw

VACUUM PACKING MACHINE 25 KG

Vacuum Chamber Size: 610 Wide x 280 Depth {Average) x 710 Height.
Over all Machine Size - 1230 Length x 650 Depth x 970 Height,
Construction: All Stainless Steel 304 or Mild Steel.
Viewing port: Transparent Acrylic to observe the process.
Vacuum Pump: By default 1000 Liters / Minute
Sealing Bar 600 mm long.
1 number Gas Flushing: By default.
Packing Cycle: 35 Seconds & above depending upon the product
Electrical Consumption: Less than 3.5 kw.
Mould: 25 Kg SS 304, 1 number
Other sizes optional.